Desiccation survival of Listeria monocytogenes and other potential foodborne pathogens on stainless steel surfaces is affected by different food soils

Food processing environments are suspected to be the primary source of Listeria monocytogenes contamination of foods. We investigated the survival of L. monocytogenes on stainless steel that was soiled with food components (minced tuna, ground pork, and cabbage) followed by dehydration. Stainless steel coupons were inoculated with 10⁷ CFU/coupon and stored up to 30 days. In comparison with Staphylococcus aureus and Salmonella Typhimurium, L. monocytogenes demonstrated the highest survivability where about 3 log CFU/coupon remained at the end of the experimental period. While survival during the early storage period was markedly affected by both food-component attachment and food type, a long dehydration period diminished the effect of those.     

Heat transfer of tubes closely spaced in an in-line bankTransfert thermique de tubes serres dans un reseau en ligneWärmeübergang in einem fluchtenden rohrbündelTeплoпepeнoc oт тpyб в кopидopнoм лyKhcyкe

An experimental investigation of heat transfer around four cylinders closely spaced in a cross-flow of air has been conducted. The cylinders are settled in tandem with equal distances between centers. Their inline pitch ratio is in the range of $\text{1.15 ≤}\text{c}\text{d ≤ 3.4}$ (c = distance between cylinders' centers, d = cylinder diameter); the Reynolds number ranges from 10⁴ to 5 × 10⁴. It is found that there exists a critical Reynolds number Red_c at which the heat transfer behavior changes drastically, and is correlated with the in-line pitch ratio by $\text{Red}{}_{\mathrm{c}}\text{= 1.14 × 10}{}^5\text{(}\text{c}\text{d)}{}^{\mathrm{?5.84}}$.Variations of characteristic features of the mean and local Nusselt numbers are discussed in relation to the length of the vortex formation region behind the cylinder.     

Higher order structures and toughening mechanisms for simultaneously polymerized polymethacrylate/polyurethane

Amorphous polymer/crystalline polymer blends can be prepared via the simultaneous polymerization of polymethacrylate/polyurethane combinations. The relationship between higher order structures and fracture mechanisms in these blends must be uncovered to elucidate the source of the increased fracture toughness of such materials. The present work involves the production of blended polymethacrylate/polyurethane and assess the internal structures of these specimens using optical and electron microscopy. These observations reveal the presence of both spherulites and elastomeric phases. The spherulites consisting of the polyurethane and are several micrometers in diameter whereas the phase-separated polyurethane elastomeric domains are approximately 100 nm in size. Multiple cracks, crack bridging and plastic deformation around the precrack tips of loaded specimens are evidently responsible for the increased toughness of these blends. The former two phenomena are attributed to the presence of spherulites while the plastic deformation of the methacrylate matrix is ascribed to cavitation of the polyurethane elastomeric phases in response to loading.     

AE behaviors evaluation with bp neural network

This paper reports our experiment on training a three layer forwards neural network with backpropagation algorithm (BP) to memorise acoustic emission (AE) behaviors of magnesium alloy during fatigue test process and perform the mapping from AE behaviors to fatigue crack propagation. This study reveals the potential possibility of using artificial neural networks for automated AE testing. Simulation results are very encouraging and conclusively in favor of this attempt.     

Evaporation characteristics of multi-component fuel

The maximum liquid phase penetration and evaporation behavior was investigated by using simultaneous measurement for mie-scattered light images and shadowgraph ones. The objective of this study was to analyze effect of variant parameters and fuel properties on evaporation behavior, and to investigate liquid phase penetration for the single- and multi-component fuels. The experiments were conducted in a constant-volume vessel with optical access. Fuel was injected into the vessel with electronically controlled common rail injector. It was observed that: liquid phase length is influenced by fuel properties. High-boiling point fuel within the multi-component fuel controls liquid phase length.     

Experiment and numerical simulation of double-layered RC plates under impact loadings

This paper is to investigate and to propose a method to improve the impact resistance of reinforced concrete (RC) plates against projectile impact, and the damage of double-layered RC plates is examined experimentally and simulated analytically. In tests, a projectile launching apparatus, which is a 40 mm smooth-bore airgun, was used. Based on experimental results, numerical simulations with the DYNA-3D code, which takes account of the dynamic constitutive law of concrete, were done to find the applicability of the present computer code to the analysis of double-layered RC plates under high-speed impact loadings. In this study, the impact resistance of concrete plate is defined as the degree of local damage. In both experiments and numerical simulations, the effect of double-layering on the impact resistance is discussed.     

Identification of Fuzzy Relations with Multiple Hyperplanes by Genetic Algorithm in Structural Design

Abstract: This paper proposes a method for formulation and quantification of human subjective evaluations and uncertain numerical values by using multiple hyperplanes based on the results of questionnaires distributed to structural designers that are composed of four questions about structural design and planning, i.e., ( Q 1) structural damage , ( Q 2) structural economy in a macroscopic sense , ( Q 3) structural safety, and ( Q 4) opening patterns in facade. In this paper, some hyperplanes in multidimensional spaces are used as a method to identify fuzzy relations (states) in intelligent fuzzy networks for seismic structural planning. A genetic algorithm is employed as a search method for optimal formulations and is proved to be very effective as a method for such an identification.     

Effect of a catalyst on heterogeneous nucleation in pure and Fe-Ni alloys

In order to elucidate the nature of the heterogeneous nucleation, a differential scanning calorimetry (DSC) thermal analysis of pure Fe and Fe-Ni alloys (Ni content: 1.0 to 29.3 mass pct) containing TiN, Al₂O₃, and Ti₂O₃ was conducted. Then, special attention was paid to the difference in the phase of the primary crystal nucleated by the triggering effect of a catalyst (nucleating agent). The solidification and transformation mode appearing during cooling in these alloys is classified into three cases: F mode, FA mode, and A mode. The change of modes and the critical undercooling (ΔT) depend on the kind of catalyst used as well as the chemical composition (Ni content). In addition, in spite of the kind of primary crystal, the value of ΔT is always small in the order of TiN, Al₂O₃, and Ti₂O₃. As a matter of fact, only TiN has a practical effect as a catalyst on the triggered nucleation of the primary crystal of the δ phase. None of them has a practical effect on the nucleation of the primary crystal of the γ phase. This article is based on a presentation given in the Mills Symposium entitled “Metals, Slags, Glasses: High Temperature Properties & Phenomena,” which took place at The Institute of Materials in London, England, on August 22–23, 2002.     

Production of triacylglycerol and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by the toluene-degrading bacterium Rhodococcus aetherivorans IAR1

Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) produced by various bacteria has been intensively investigated as a promising biodegradable plastic, but required a supply of an expensive precursor as a secondary carbon source for its production. In a previous study, we identified a new bacterial strain, Rhodococcus aetherivorans IAR1, which synthesizes PHBV from toluene without the supply of a precursor. Toluene is the volatile organic compound most abundantly emitted to the environment. In the present paper, we show that R. aetherivorans IAR1 produces triacylglycerols (TAGs) simultaneously with PHBV. Both PHBV and TAGs were synthesized before the nitrogen source is completely exhausted. The cellular content of PHBV reached 10% of cell dry weight (CDW) and its synthesis ceased even during intermittent supply of toluene. However, accumulation of TAGs continued during cultivation and their cellular content reached 24% of CDW at the end of cultivation. Cerulenin inhibited TAG production and increased PHBV cellular content up to 30% of CDW. The mole fraction of 3-hydroxyvalerate (3HV) in PHBV produced from toluene increased from 60% to 80% during its accumulation. Fatty acid compositions of TAGs produced from acetate and toluene were different. At the end of cultivation, the mole fraction of C17:0, one of odd-carbon number fatty acids, was 5% on toluene or 10% on acetate while the mole fraction of 3HV in PHBV from toluene was as high as that in PHBV from acetate, suggesting that a C5 intermediate of toluene degradation might directly become a precursor of 3HV whereas propionyl-CoA is required for the incorporation of C17:0 into TAGs.